REVO 18|36
220v

logo
"This lathe is an absolute overachiever in its price range... Laguna has clearly done their homework, and they seem to be making a statement that they want to be a serious contender in the lathe market. The 18|36 stands out in its class in terms of performance, control, superb attention to detail and ergonomics."

the features of the 18|36 220v

Variable Frequency Drive

  • Delta S1 Variable Frequency Drive
  • 220v Motor: TEFC, 1725 RPM, 2HP
  • Single Phase Input, Three phase Output
  • Drive Belt: Poly-Groove with EZ Access
cropped_1836-Vacuum-1

LAGUNA Bearings

Our bearings are sealed, preloaded, & press fit into cast iron housing:

Front Bearing is pressed fit into headstock of LEFT side. RIGHT side is held in place by the spindle

Rear Bearing is designed to float within housing (+0.0006″) on LEFT side. RIGHT side has a bearing wave washer locked in place by precision lock nut

revo_bearing_diagram

The basic dynamic load rating is 30% higher than a 6207 Ball Bearing. Another benefit to the REVO’s cone shaped headstock is the extreme bearing distance of 11.25″

 

Tailstock

  • 4.5″ Engraved Self-ejecting
  • Tailstock Through-Bore: 3/8″
1836_Tailstock_Detail
  •  Electrical: 2HP, 220Volt, 60 hz
  •  Motor: Induction, 1725 RPM, TEFC
  •  VFD: Delta S1 Variable Frequency Drive
  •  Phase: 1 Phase input, 3 Phase output
  •  Poly-Groove Drive Belt w EZ Access
  •  Recommended Breaker: 20 Amp
  •  Spring Loaded Spindle Lock
  •  Max. Outboard Swing: 32”
  •  Swing over Banjo: 13 ½”
  •  Steel Bed: ASTM A36
  • Toolrest Post Size: 1”
  •  Spindle Taper: MT#2
  •  Swing over Bed: 18”
  •  RPM High:135-3500
  •  RPM Low: 50-1300
  • Tailstock Quill: 4 ½”, Engraved, Self-Ejecting
  •  Floor to Spindle Center: 41 ½” w Pads
  •  Front Bearing: TPI Taiwan 6207LLU
  •  Rear Bearing: TPI Taiwan 6205LLU
  •  Spindle Index #: 14/36/48 w Lock
  •  Distance between Centers: 36”
  •  Headstock Through-Bore: 3/8”
  •  Headstock Travel: Full Length
  •  Tailstock Through-Bore: 3/8”
  •  Tailstock Storage of centers
  •  Spindle Size: 1 ¼” X8 TPI RH
  •  Floor to Bed: 32 ½” w Pads
  •  Floor Space: W 60” D 26” H 47”
  •  Weight (Net/Ship): 427/480 Lbs.
Deluxe Wheel System
Industrial Flood Light
12″ Swing-Away Extension
20″ Steel Extension
Headstock Guard
3″ Riser Kit

Laguna lathes are sold exclusively through our worldwide dealer network

Online Dealers >

Find A Local Dealer >